Ethernet Framing Data Communication Quiz by Ravinder Nath Rajotiya - November 13, 2019November 13, 20190 Share on Facebook Share Send email Mail Print Print Welcome to your Ethernet Frame 1. Which of the following is the format of application data after being processed by the data link layer. PDU Packet Frame Segment None 2. Which of the following information is not included in the MAC address table of a switch. MAC Address Port Address IP Address Undo Eth-trunk None 3. Which of the following statements are true about the dynamic MAC address table? After a device is reset , an interfaces card is hot swapped , or an interface card is reset , the saved entries on the device or interface card are not lost. Dynamic MAC address entries are obtained by learning the source MAC addresses of packets received by an interface, and can be aged out. After a device is rest , an interface card is hot swapped or an interface card is reset dynamic MAC address entries on the device or interface card are lost. You can obtain the number of users communicating on an interface by checking the number of specified dynamic address MAC address entries. None 4. If the value of the "Type/Length" field of an Ethernet data frame is 0x0800, the length range of the upper - layer packet header carried by the data frame is from 20B to 60B. TRUE FALSE None 5. Which of the following technologies is used to bind MAC addresses to interface on a switch SEP Port security ACL NAT None 6. The network administrator finds that a port on the switch has learnt MAC address but cannot forward data frames. What is the state of the port? Blocking Disabled Listening learning None 7. After a blackhole MAC address is configured on a device, the device discard packet whose source or destination MAC address is the blackhole MAC address TRUE FALSE None 8. When the host accesses web service of the server , the value of the 'protocol' field at the network layer is 6. TRUE FALSE None Hint 9. Which of the following statement about Length/Type = 0x8100 in an Ethernet data frame is/are true? The data frame must carry a VLAN tag The upper layer of the data frame must have an IP header The upper layer of the data frame must have a TCP header The upper layer of the data frame must have a UDP header None 10. In a broadcast address, all host bits are set to 1 and a broadcast address can be used as a host address. TRUE FALSE None Time's up Share on Facebook Share Send email Mail Print Print